How to set up a Zencash Mining Rig

ZenCash is a fairly new coin – it started out as ZCash, and then split off after a hard fork to ZClassic, and now into ZenCash. From what I’ve read, there is lots of reasons to support this coin. This is what I did to set up a GPU miner to mine ZenCash.

  1. First thing you need to do is select a pool to mine ZenCash with, or if you are a large miner, you might want to solo mine, but then again you wouldn’t be on my site reading how to start out mining would you!I chose to use SuprNova, but you may choose another pool. The ZenCash website has a list of the best pools: https://zensystem.io/mining-pools/
  2. Once you’ve created an account and logged in, you can click the ‘Help’ link on the left hand side and choose ‘Getting started’
  3. Also on the ZenCash site is a list of available mining software. I like Claymore’s Ethereum software, but looks like he doesn’t have an NVidia equihash miner, so I downloaded EWBF’s Cuda Zcash miner from here (I clicked on the Windows x64 download link and downloaded the newest ZIP file)
  4. In your SuprNova account, Click on ‘My Account’ and ‘My Workers’ and add a new worker. Remember this username and password as that’s what you’ll use to set up your EWBF Zcash miner .bat file
  5. On your ZenCash mining rig, extract the ZCash Miner zip file, open up the directory and look for the suprnova.bat file. Right click on it and select edit. Change the ‘–user suprnova.1’ to be your worker name and worker password like this ‘–user accountname.workername’
  6. Change the ‘–pass x’ to read ‘–pass workerpassword’
  7. Save and close the file.
  8. Double click on the .bat file to start up the EWBF miner and happy hashing!

Troubleshooting EWBF ZenCash Miner

Error: Cannot Connect to Pool

Make sure you have the pool address correct, and the port correct. The suprnova.bat that ships with the EWBF zcash miner uses the old port 2412. The port needs to be 3618

Error: No devices selected

Make sure you have the –cuda_devices option set to the numbers of the GPU you want to use. I also had permissions issues under windows. For some reason the claymore Ethereum miner didn’t have any issues, but the EWBF miner did have troubles. I could test this by right clicking on cmd.exe and choosing ‘run as administrator’. Once opened, I navigated to my EWBF directory and manually typed in the line I had entered in the .bat file. It ran without a hitch.

To get around having to manually do this, I created a shortcut to the zencash mining .bat file (right click, choose ‘create shortcut).

Next, I right clicked on the shortcut and selected ‘properties’. In the popup, under the ‘shortcut’ tab, click the ‘Advanced…’ button and check off ‘run as administrator’. Click OK, and then click OK on the other window too.

2 thoughts on “How to set up a Zencash Mining Rig

  1. Don’t miss out on the “cryptocurrency revolution”; purchase a cryptocurrency miner and become a part of “GOLD 2.0”. This mining rig was created for attaining the highest hashrate to wattage ratio by achieving 4.22 Sol/watt. The EVGA GeForce GTX 1070 Ti FTW2 is the NO.1 graphics card on the market today giving you a blazing hash rate of 3090 H/s or 3090 Sol/s! The system is pre-built, pre-tuned and ready to mine any of the top currencies including (but not limited to):

    NiceHash (Switching Algorithm)
    Zcash (ZEC)
    Zencash (ZEN)
    Ethereum (ETH)
    Zclassic (ZCL)
    Monero (XMR)
    Siacoin (SC)
    Bytecoin (BCN)
    Verge (XVG)
    Electroneum (ETN)
    Bitcoin Gold (BTG)
    etc…
    Mining Rig Specifications

    Hardware

    6x GPU – EVGA GeForce GTX 1070 Ti FTW2 GAMING Graphics Card
    1607 MHz – Boostable to 1683 MHz
    2432 CUDA Cores
    Pascal Architecture
    8GB of GDDR5 VRAM
    8 Gbps Memory Speed
    256-Bit Memory Interface
    iCX Cooler with Back Plate

    1x Intel Pentium G4400 3.3GHz

    1x GIGABYTE Motherboard GA-Z270P-D3
    Updated with official Bitcoin mining BIOS version C1.F6a

    1x 4GB RAM – DDR4 2400MHz

    1x Corsair HX1000i PLATINUM 1000 Watt Power Supply Unit

    1x 60GB Solid State Hard Drive

    1x High Air Flow – Mining Rig Frame

    Software

    Windows 10 Professional: installed with official Microsoft Verified license

    NiceHash Miner Installed and Tuned To Your device

    MSI Afterburner for Overclocking

    Delivery
    The mining rig will be 100% Assembled and ready to mine out of the box. Delivery packaging will have to be removed before use.

    Disclamer
    The Miner is designed to run in a cool environment. Proper airflow and attention to temperature is the buyer’s responsibility.
    Your mining results may vary depending on cooling, internet speed, settings, and mining pool.
    The miner has been tested and verified in working order. No returns are accepted.Payment is accepted via bitcoin or ether only..email at []com

Leave a Reply to asspipeisu Cancel reply

Your email address will not be published. Required fields are marked *